Auto Glass Installation in Tucson Az
March 26th, 2009DIY Auto Glass Installations
If your plan to do your own auto glass installation in Tucson, you’ll first want to contact a local Tucson auto glass shop and let them know the make and model of your car, and the location of the glass that is damaged.
Before you purchase your auto glass replacement in Tucson, ask an auto glass service what kind of adhesive you’ll need to get the job done. Remember, this glass adhesive must be able to hold your auto glass in place, especially if your automobile is involved in an accident.
Once you remove any gaskets around your auto glass, throw them away. You’ll need to replace these gaskets in order to prevent future leaks. Then you’ll want to clean any dirt and residue around the auto glass. Next, seal the area around the windshield with a special sealer made specifically for this purpose. (Ask your local auto glass shop)
After you have applied the sealer, just install the gasket directly on the sealer. Now take your new windshield and set the auto glass right inside the groove of the gasket. Be sure to work around your windshield by pulling the gasket up and over your glass. It might help to use a plastic screwdriver-like tool for this purpose. (Ask your local Tucson Auto Glass Shop)
Now you’ll just want to apply a small bead of your adhesive around the edge and under the gasket. This will help to ensure that the seal is completely sealed off preventing future leaks. Congratulations! You have just installed your first piece of auto glass! Just allow the adhesive to dry and clean any left over residue with a razor blade.
So are you feeling confident enough to replace your first windshield? If not, don’t hesitate to call All Pro Auto Glass and we’ll schedule your Tucson auto glass replacement today!